Since your 1990 Ford Bronco II uses the PH8A filter you will need the Derale 3/4-16 Filter Nipple, # D98020, that you have referenced. The shorter threaded end goes into the engine side and the longer threaded portion is where the filter will attach. view full answer...
According to my research, the 1989 Bronco II used P205/75-15 tires as the stock tire size.
If this is the size of your spare tire, and my arithmetic is correct your tire is 27 inches in diameter. If you click the provided link, you can see the various colors and styles of covers we offer for your wheel size.
I'd recommend one of the covers offered by Rampage. The covers are manufactured of the same fabric that Rampage uses in their replacement Jeep soft tops, so you know the covers will... view full answer...
To tow a trailer with trailer brakes you will need a 6-Way or 7-Way connector depending on which style of connector is on the trailer you will be purchasing. I would recommend going with the 7-Way connector, which can be used with an adapter, item # 47549, if the trailer has a 6-Way connector installed on it.
You will need a 4-Pole Hardwire Kit Including Circuit Tester, item # 18252, and a Brake Controller 7 & 4 Way Installation Kit, item # ETBC7, for this installation. Even though your... view full answer...
You will need to check your owners manual or with the Ford dealer to see if your 1990 Ford Bronco II can be flat towed. Some vehicles must be equipped with a transmission lube pump, an axle disconnect, drive line disconnect or free-wheeling hubs before they can be towed. If the correct procedure is not followed it will cause severe damage to the transmission.
If you are able to tow your vehicle, and you have a tow bar, the other parts you will need are the base plates, safety cables, lights,... view full answer...
You have installed trailer wiring harness # C59496 correctly on your 1989 Ford Bronco II. The red wire should be grounded along with the white wire. Make sure the ground location is a clean, bare metal surface.
Brown is for running lights, yellow will be for the combined left turn/brake light wire on the vehicle and green is for right turn/brake lights.
If it still isn't working, then you can test it to see if there is a problem with the converter box using a circuit tester such as #... view full answer...
The Roadmaster base plate kit, part # 411-1 is designed to fit your 1988 Ford Bronco ll.
You will need an adapter, part # RM-025 that will allow the base plates to be able to attach to the tow bar you said you have.
When flat-towing a vehicle you will need 5 items. The tow bar, base plates, safety cables, lighting for the towed vehicle and most states now require a supplemental brake system.
If you need any of these other components just let me know and I can make some recommendations... view full answer...
The RoadMaster Base Plate to Blue Ox and Demco Tow Bars Adapter # RM-033 will connect the Roadmaster Crossbar-Style Base Plate Kit # 411-1 to the following Blue Ox tow bars:
Blue Ox Adventurer, Avail, Alpha, Acclaim, Allure, Aventa, Ambassador, Alexxa, Trion, Aventa II, Aventa LX and Aladdin.
If you have the Ascent then you'll need to use the # BX88178.
If you have the Rangefinder II then you'll need the # RM-037.
If you haven't gotten all of the other components to flat tow your... view full answer...
If your 1989 Ford Bronco II has a manual transfer case, you will be able to flat tow this vehicle. The vehicle will need to be placed in neutral at the transfer case. Once this is done, you can flat tow. You will need a few items to flat tow your 1989 Ford Bronco II: a base plate, tow bar, brake controller, wiring harness, and safety chains.
The base plate I recommend for your vehicle is the Roadmaster Crossbar-Style Base Plate Kit - Fixed Arms. part # 411-1. It is compatible with Roadmaster... view full answer...
To mount the Surco Safari Rack 5.0 Rooftop Cargo Basket # S5072 to your 1989 Ford Bronco II with rain gutters, you can use the Mounting Adapter for Surco Safari 5.0 Rooftop Cargo Basket # DGM100. This will allow you to mount the Safari 5.0 rack to the rain gutters on your Bronco II. view full answer...
Great news! The Falcon 5250 is compatible with the Classic also known as Standard Baseplates # 410-1 for your 1985 Ford Bronco II.
The tow bar assembly should have the Quick Disconnect Base that will mount to the base plates properly. Check out the attached image.
You will want to check your owner's manual for the specific any instructions and limitations while flat towing your vehicle.
I have linked the above mentioned product to this page for your convenience. view full answer...
The Classic Accessories spare tire cover # 052963753479 will fit your P225/75R-15 because your overall diameter is between 26-3/4 and 29-3/4 inches. All of our tire covers we currently offer will be elastic instead of a drawstring. Once you put the cover on your spare tire, it won't scratch the wheel as the inside material is vinyl PVC with polyester backing.
This tire cover is made of vinyl fabric and has quick connect clips for a fast and adjustable fit.
I included a video review for... view full answer...
We have all of the parts you'd need to flat tow your 1986 Ford Bronco II. First thing is a base plate kit like the part # 410-1 which is a confirmed fit.
In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon All Terrain, # RM-522. This has non-binding arms which makes the setup very easy to connect/disconnect.
For lighting/safety cables, locks,... view full answer...
Thanks for your question about the Curt Trailer Hitch, part # C13011. This hitch is a confirmed fit for your 1986 Ford Bronco II and has a bolt-on installation with no welding required. You will, however, need to drill four 17/32" holes through the frame rails per the installation instructions. The complete hardware kit and installation instructions included.
If you plan on doing some towing you will want the following parts:
Wiring kit # C59236
Ball mount # D-4
Hitch Pin and Clip, #... view full answer...
Yes, you can use the Detail K2 Rampage II Snow Plow part # K2RAMP8219 on your 1988 Ford Bronco II with the correct custom install bracket kit part # K281100. view full answer...
I do have roof mounted off road lights that will work on your 1985 Ford Bronco II, however, we have not had a chance to confirm the fitment of the Carr Deluxe Light Mounting Bar part # CARR210341 on your vehicle yet.
For an off-road light bar that will work on the roof of your vehicle, I recommend using the MaxxTow Off-Road Light Bar part # MT80634. This light bar comes with everything need for installation in addition to producing up to 17,600 lumens with a lifespan of 30,000 hours. It... view full answer...
The 215/75R15 tire size you have on your 1990 Ford Bronco II has an overall diameter of about 27-3/4-inches. The tire cover you referenced, USA Flag Spare Tire Cover # PC000798R01, will fit this tire diameter with some extra room to spare. It actually fits tire diameters up to 31-inches and uses an elastic cord to provide a snug fit.
We can also offer you a plain black cover from Classic Accessories, their # 052963753479, which fits tires from 26-3/4-inches to 29-3/4-inches. view full answer...
We have a Curt hitch that does fit your 1984 Ford Bronco II, but it's not the # 13028 that you referenced. Instead you'd want the Curt # C13011 which is a confirmed fit and would work well. view full answer...
We do have an adapter that will allow you to use a Duncan EAZ Aligner tow bar with a set of Roadmaster base plates. For that you'd need the part # RM-038. Roadmaster then has the base plate kit part # 410-1 which is a confirmed fit for your 1985 Ford Bronco II. Duncan is no longer in business.
Your last question sets up an opposite situation than what you have. I believe you meant to say can you use an EAZ Aligner with a Roadmaster base plate kit which you can using the adapter I mentioned. view full answer...
Go To Results